Product Lines
 
You are here :Products > Gasket plate heat exchanger > Gasket PHE steam heater
Stainless Steel Alloy 316 Plates Steam Plate Heat Exchanger with Carbon Steel No

 

Detailed Product Description

 

 

Stainless Steel Alloy 316 Plates Steam Plate Heat Exchanger with Carbon Steel Nozzles

Working principle

Channels are formed between the plates and the corner ports are arranged so that the two media fl ow through

alternate channels. The heat is transferred through the plate between the channels, and complete counter-current

flow is reated for highest possible efficiency. The corrugation of the plates provides the passage between the plates,

supports each plate against the adjacent one and enhances the turbulence, resulting in efficient heat transfer.
 

STANDARD MATERIALS

Frame plate: Mild steel Epoxy painted

Nozzles: Carbon steel

Metal lined: Stainless steel, Titanium

Plates: Stainless steel Alloy 316 or Titanium
 

A great advance on conventional PHEs
 

Optimized plate design

The BS Series solves two main problems that occur when conventional plate heat exchangers (PHEs) are used

as steam heaters. The first is that when water is heated over a relatively wide temperature difference, e.g. from

10 to 70°C (50 to 158°F), the high steam velocity causes erosion and noise problems. The second is that when

high water flow rates are used when heating water only a few degrees, the PHE has to be oversized to keep the

secondary side (water) pressure drop within reasonable limits. Both of these drawbacks are now eliminated in

the new BS Series of PHEs by a unique plate geometry that allows problem-free heating over narrow and wide

temperature ranges.
 

Way ahead of shell-and-tubes

No thermal fatigue Cyclic heating and cooling produces thermal fatigue in rigid steam heaters like straight

shell-and-tubes. This often results in cracked and worn components that demand maintenance and repair, thereby

causing unwanted system downtime. The combination of thin plates and flexible gaskets in the BS Series prevents

thermal fatigue by allowing the units to expand and contract in response to temperature changes. Fine temperature

control Rapid heat transfer resulting from the small hold-up volume and high surface/volume ratio of the plates

enables a fast response to temperature control.

Manufacturing

Chemical processing

HVAC

Marine

Food and drink

Pharmaceutical


Short delivery time.

High quality

Reasonable price

Customer made

Know-how design and customer support

 

Model 

BS60H

Cross Reference BAODE

TS6M

  Height,  H [mm] 

704

704

Width,  W [mm] 

400

410

  Min standard length,  L [mm] 

530

540

  Max standard length,  L [mm] 

1430

1440

Vertical port distance,  VC [mm] 

380

380

  Horizontal port distance,  HC [mm] 

203

203

  Max temperature [°C] 

180

180

 Max pressure [barg] 

16

20.6

 Flange size 

DN65/2” 

DN65/2” 

  Max. flow rate [kg/s] 

20

copyright © Baode Heat Exchanger Co.,Ltd. 2018

关闭